Drain Carburetor Float Bowl on Inverter Generator

By Jackie Green on Thu Nov 05, 20

Follow the steps below to drain the carburetor float bowl.

 Step 1: Take of the engine access panel and locate the carburetor drain screw on your inverter.
Location of screw on 2200-2500 inverters Location of screw on 4500 inverters
Step 2: Take the rubber hose coming out of the bottom of the carburetor and place in a suitable container.
Step 3: Take a flat head screwdriver and loosen the screw under the carburetor. Make sure not to remove the screw completely.
Step 4: Once fuel stops draining. Tighten screw with flat screw driver.